Heart & Industry

Home · Spectrum Welding Supplies

1.2mm ESAB OK Autrod 13.26 COR-TEN MIG Weld Wire | 18kg

1.2mm ESAB OK Autrod 13.26 COR-TEN MIG Weld Wire | 18kg

Spectrum Welding Supplies

£200

The non-copper coated OK AristoRod 13.26 is an ER80S-G low-alloyed, nickel-copper 3Ni1Cu (0,8% Ni, 0,45% Cu), solid wire for GMAW of weathering steels, such as COR-TEN , Patinax, Dillicor. According to NACE it would be acceptable to use these welding consumables, since the nickel content is below the maximum acceptable level of 1 % for sour gas applications. One other requirement from NACE is the maximum hardness of the deposited weld metal, which must not exceed 22 HRC. The weld metal composition and mechanical properties also make this product suitable for welding high strength steels with a

Spectrum Welding Supplies's own words, read from their page.

Buy from SPECTRUM WELDING SUPPLIES LIMITEDPrice seen 2026-09-26. Not an affiliate link, we earn nothing from it.

Where this comes from

The part other shops don't tell you. Three separate questions, kept separate on purpose, each with its source.