Heart & Industry

Home · Seatallan

ST95 30kN Double Bollard Rope Grip (pair)

ST95 30kN Double Bollard Rope Grip (pair)

Seatallan

£2840.4

The rope is wrapped around each bollard, once or twice, depending on it’s diameter and then the tail is clamped in a vice. The bollard diameter is 40mm. The vice will accommodate rope up to 8mm maximum. Friction between the bollards and the rope and the initial tension from the vice take the load applied by the tensile testing machine. If testing to BS EN919 then it should be noted that the ratio of bollard diameter to rope diameter should be a minimum of 10:1. The grip is designed to be loaded as follows. Using the grip illustration opposite, take an anti-clockwise turn round the lower bollar

Seatallan's own words, read from their page.

Buy from SEATALLAN LIMITEDPrice seen 2026-09-26. Not an affiliate link, we earn nothing from it.

Where this comes from

The part other shops don't tell you. Three separate questions, kept separate on purpose, each with its source.