Heart & Industry

Home · Seatallan

ST44 10kN Rope Grip (pair)

ST44 10kN Rope Grip (pair)

Seatallan

£1746.9

The rope is wrapped around a bollard, once or twice, depending on it’s diameter and then the tail is clamped in a vice. The bollard diameter is 40mm. The vice will accommodate rope up to 8mm maximum. Friction between the bollard and the rope and the initial tension from the vice take the load applied by the tensile testing machine. If testing to BS EN919 then it should be noted that the ratio of bollard diameter to rope diameter should be a minimum of 10:1. The grip is designed to be loaded by holding the sample in the left hand, winding it round the bollard and then passing it through the jaw

Seatallan's own words, read from their page.

Buy from SEATALLAN LIMITEDSEATALLAN LIMITED is a UK retailer, not the maker. Price seen 2026-09-26. Not an affiliate link, we earn nothing from it.

Where this comes from

The part other shops don't tell you. Three separate questions, kept separate on purpose, each with its source.