Heart & Industry

Home · Electronic components · Pimoroni

Adafruit NeoRGB Stemma - NeoPixel to RGB PWM LEDs and Strips - STEMMA JST PH 2mm

Adafruit NeoRGB Stemma - NeoPixel to RGB PWM LEDs and Strips - STEMMA JST PH 2mm

Pimoroni

£3.55

Whenever we're working with 'true analog' LED strips , that have 1-3 channels of RGB or White LEDs, we wish we had already invented to make wiring them easier: controlling these strips takes a bit of wiring since they almost always need 12VDC and driver FETs. Now, we've finally created the Adafruit NeoRGB Stemma board - which will make our lives easier, and maybe even some customer's too! The NeoRGB is a no-soldering, plug-and-play STEMMA board with a 2mm JST PH connector on one end, and a 5-pin 0.1" screw terminal block on the other. It can convert standard 5V 800KHz NeoPixel signal using a W

Pimoroni's own words, read from their page.

Buy from PimoroniPrice seen 2026-09-05. Affiliate link.

Where this comes from

The part other shops don't tell you. Three separate questions, kept separate on purpose, each with its source.