Heart & Industry

Home · Cardno

Wire Rope Grip - Din 1142 & EN13411

Wire Rope Grip - Din 1142 & EN13411

Cardno

£1.6

We have not confirmed this price since it was first recorded. Check before buying.

Part No: v49005 Galvanised wire rope grips that meet the performance requirements of DIN 1142 and EN 13411. Available in 8mm, 10mm 13mm. diameters. For 9mm wire rope use 10mm grips and for 12mm use 13mm grips. Safety Guide Rope grips should only be used as a temporary solution to securing a wire rope. The use of grips reduces the capacity of the rope by at least 10%. A minimum of 3 grips should be used (up to 22mm rope diameter), with the saddle on the loaded or long part of the rope. The grips should sit with the saddle the same way round. The nuts should be checked for tightness before each

Cardno's own words, read from their page.

Buy from CARDNO LTDPrice seen 2026-09-19. Not an affiliate link, we earn nothing from it.

Where this comes from

The part other shops don't tell you. Three separate questions, kept separate on purpose, each with its source.